| Scalar Object |
| ccrCpuEntry | .1.3.6.1.4.1.9.9.105.1.1.1.1 |
Redundancy information for a CPU card. |
| ccrSyncConfigOnSet | .1.3.6.1.4.1.9.9.105.1.1.2 |
The device's running-configuration and
startup-configuration both reside on the active CPU
card. This object indicates whether these
configurations should be copied from the active CPU
to the standby CPU whenever they change. It is
acceptable to copy either, both, or neither. |
| ccrSwitchEntry | .1.3.6.1.4.1.9.9.105.1.2.1.1 |
Redundancy information for a switch card. |
| ccrSwitchLastSwitchoverTime | .1.3.6.1.4.1.9.9.105.1.2.2 |
The value of sysUpTime at the last switchover of the
switch cards.
The value is zero if there was no switchover since
agent initialization. |
| ccrSwitchLastSwitchoverReason | .1.3.6.1.4.1.9.9.105.1.2.3 |
The reason for the last switch card switchover.
The value is none(1) if there was no switchover since
agent initialization. |
| ccrSwitchBw | .1.3.6.1.4.1.9.9.105.1.2.4 |
The switching capacity (i.e., bandwidth) of the
switch fabric.
tenGbps(1) - 10 Gigabits/sec
twentyGbps(2) - 20 Gigabits/sec.
|
| ccrDesiredSwitchBw | .1.3.6.1.4.1.9.9.105.1.2.5 |
The desired switching capacity (i.e., bandwidth) of the
switch fabric.
tenGbps(1) - 10 Gigabits/sec
twentyGbps(2) - 20 Gigabits/sec
If the value configured by writing to this object is
supported by the device, it will be applied at the next
reboot. The speed at which the switch fabric is currently
operating is reflected by the value of ccrSwitchBw. |
| Tabular Object |
| ccrCpuSlotIndex | .1.3.6.1.4.1.9.9.105.1.1.1.1.1 |
Identifies a chassis slot. |
| ccrCpuMode | .1.3.6.1.4.1.9.9.105.1.1.1.1.2 |
The redundancy mode of this CPU card. |
| ccrCpuStatus | .1.3.6.1.4.1.9.9.105.1.1.1.1.3 |
The operational status of this CPU card. |
| ccrSwitchSlotIndex | .1.3.6.1.4.1.9.9.105.1.2.1.1.1 |
Identifies a chassis slot. |
| ccrSwitchMode | .1.3.6.1.4.1.9.9.105.1.2.1.1.2 |
The redundancy mode of this switch card. |
| ccrSwitchStatus | .1.3.6.1.4.1.9.9.105.1.2.1.1.3 |
The operational status of this switch card. |
| Table |
| ccrCpuTable | .1.3.6.1.4.1.9.9.105.1.1.1 |
There is an entry in this table for each slot that
can hold a CPU card. |
| ccrSwitchTable | .1.3.6.1.4.1.9.9.105.1.2.1 |
There is an entry in this table for each slot that
can hold a switch card. A 'switch card' is a card that
contains the ATM switch fabric. |
| Trap |
| ccrCpuStatusChange | .1.3.6.1.4.1.9.9.105.2.0.1 |
This notification is generated when the value of
ccrCpuStatus changes for a CPU card.
The varbind indicates the current status of the
affected card. |
| ccrSwitchStatusChange | .1.3.6.1.4.1.9.9.105.2.0.2 |
This notification is generated when the value of
ccrSwitchStatus changes for a switch card.
The varbind indicates the current status of the
affected card. |
| ccrSwitchModeChange | .1.3.6.1.4.1.9.9.105.2.0.3 |
This notification is generated when the value of
ccrSwitchMode changes from active(1) to either
standby(2) or unused(3) or notPresent(4).
The varbind indicates the current mode of the affected
card. |
| Object Identifier |
| ciscoC8500RedundancyMIB | .1.3.6.1.4.1.9.9.105 |
This MIB allows management of redundancy of CPU and
switch cards for the Catalyst 8540 switch, and other
products with similar implementations.
The Catalyst 8540 is an ATM switch. It has 13 (or, in
some models, 14) slots, of which 2 slots can hold CPU
cards, and 3 (or, in some models, 4) slots can hold
switch cards. A switch card is one that contains the
ATM switching fabric. Two switch cards are combined
to operate in 20Gbps switching mode.
For CPU cards, 1+1 redundancy is supported.
For switch cards, 2+1 redundancy is supported. |
| ciscoC8500RedundancyMIBObjects | .1.3.6.1.4.1.9.9.105.1 |
| ccrCpu | .1.3.6.1.4.1.9.9.105.1.1 |
| ccrSwitch | .1.3.6.1.4.1.9.9.105.1.2 |
| ciscoC8500RedundancyMIBNotificationPrefix | .1.3.6.1.4.1.9.9.105.2 |
| ccrMIBNotifications | .1.3.6.1.4.1.9.9.105.2.0 |
| ciscoC8500RedundancyMIBConformance | .1.3.6.1.4.1.9.9.105.3 |
| ciscoC8500RedundancyMIBCompliances | .1.3.6.1.4.1.9.9.105.3.1 |
| ciscoC8500RedundancyMIBGroups | .1.3.6.1.4.1.9.9.105.3.2 |
| Group |
| ccrCpuMibGroup | .1.3.6.1.4.1.9.9.105.3.2.1 |
A collection of objects providing the ability to
manage CPU card redundancy. |
| ccrSwitchMibGroup | .1.3.6.1.4.1.9.9.105.3.2.2 |
A collection of objects providing the ability to
manage Switch Fabric card redundancy. |