| Scalar Object |
| cIdslLineEntry | .1.3.6.1.4.1.9.9.154.1.1.1 |
A set of common attributes describing both ends of an IDSL line
supported by the system. There exists an entry for each ifEntry
with an ifType of idsl(154). |
| cIdslItucPhysEntry | .1.3.6.1.4.1.9.9.154.1.2.1 |
A set of physical-layer parameters for an ITU-C class device
supported by the system. There exists an entry for each ifEntry
with an ifType of idsl(154). |
| cIdslItucPerfDataEntry | .1.3.6.1.4.1.9.9.154.1.6.1 |
A set of physical-layer statistics for an ITU-C class device
supported by the system. There exists an entry for each ifEntry
with an ifType of idsl(154). |
| cIdslIturPerfDataEntry | .1.3.6.1.4.1.9.9.154.1.7.1 |
A set of physical-layer statistics for an ITU-R class device
supported by the system. There exists an entry for each ifEntry
with an ifType of idsl(154). |
| cIdslItucIntervalEntry | .1.3.6.1.4.1.9.9.154.1.8.1 |
A 15-miute interval of physical-layer statistics for a ITU-C
class device supported by the system. There exists up to 96
entries for each ifEntry with an ifType of idsl(154). |
| cIdslIturIntervalEntry | .1.3.6.1.4.1.9.9.154.1.9.1 |
A 15-miute interval of physical-layer statistics for a ITU-R
class device supported by the system. There exists up to 96
entries for each ifEntry with an ifType of idsl(154). |
| cIdslLineConfProfileEntry | .1.3.6.1.4.1.9.9.154.1.14.1 |
A configuration profile containing enterprise-specific IDSL
line configuration information. |
| cIdslPppoaPerfDataEntry | .1.3.6.1.4.1.9.9.154.1.16.1 |
A set of PPPoA statistics for an ITU-C class device configured
for PPP operation. There exists an entry for each ifEntry that
meet the following criteria:
1) The ifEntry has an ifType of idsl(154);
2) The profile associated with the ITU-C class device specifies
a value of 'ppp' for the cIdslLineProtocol object. |
| cIdslPppoaIntervalEntry | .1.3.6.1.4.1.9.9.154.1.17.1 |
A 15-minute interval of PPPoA statistics intervals for a ITU-C
class device configured for PPP operation. There exists up to
96 entries for each ifEntry that meets the following criteria:
1) The ifEntry has an ifType of idsl(154);
2) The profile associated with the ITU-C class device specifies
a value of 'ppp' for the cIdslLineProtocol object. |
| cIdslPppoaMapEntry | .1.3.6.1.4.1.9.9.154.1.18.1 |
A mapping between a PPP session and an ATM VC. There exists an
entry for each ifEntry that meet the following criteria:
1) The ifEntry has an ifType of idsl(154);
2) The profile associated with the ITU-C class device specifies
a value of 'ppp' for the cIdslLineProtocol object. |
| Tabular Object |
| cIdslLineSpecific | .1.3.6.1.4.1.9.9.154.1.1.1.1 |
This object specifies an object identifier of an instance of
an object in the MIB. The implementation determines the
application of this object. For example, an implementation
may use this object to provide a reference to the port-class
physical entity (see the ENTITY-MIB for further details)
corresponding to the IDSL line. |
| cIdslLineConfProfile | .1.3.6.1.4.1.9.9.154.1.1.1.2 |
This object specifies the row in the adslLineConfProfileTable
(see the ADSL-LINE-MIB for further details), which applies for
this IDSL line interface.
In the case the implementation utilizes 'dynamic mode' (see
the ADSL-LINE-MIB for further details), then the value of this
object defaults to the name of a configuration profile
designated by the implementation as the default configuration
profile.
In the case the implementation utilizes 'static mode', then the
the value of this object is read-only. |
| cIdslLineAlarmConfProfile | .1.3.6.1.4.1.9.9.154.1.1.1.3 |
This object specifies the row in the
adslLineAlarmConfProfileTable (see the ADSL-LINE-MIB for further
details), which applies for this IDSL line interface.
In the case the implementation utilizes 'dynamic mode' (see
the ADSL-LINE-MIB for further details), then the value of this
object defaults to the name of an alarm configuration profile
designated by the implementation as the default alarm
configuration profile.
In the case the implementation utilizes 'static mode', then the
the value of this object is read-only. |
| cIdslItucInvSerialNumber | .1.3.6.1.4.1.9.9.154.1.2.1.1 |
This object specifies the vendor specific string that
identifies the vendor ITU-C. |
| cIdslItucInvVendorId | .1.3.6.1.4.1.9.9.154.1.2.1.2 |
This object specifies the vendor identifier assigned according
to ANSI T1.220. |
| cIdslItucInvVersionNumber | .1.3.6.1.4.1.9.9.154.1.2.1.3 |
This object specifies the vendor specific version number of
the ITU-C. |
| cIdslItucStatus | .1.3.6.1.4.1.9.9.154.1.2.1.4 |
This object specifies the state of the ITU-C transceiver:
- loopDown
The IDSL link is down, as a result of a near-end has
detected a LOS, a LOF, has not exchanged an ACT bit
with the downstream BRITE/NT1, or similar fault/condition.
- dslSync
The IDSL link has achieved physical layer activation with
the first downstream entity (iether a BRITE or the NT1).
- loopUp
The IDSL link has exchanged the ACT bit with the NT1, but
LMI signalling is not yet active. This is the normal
operating state for PPP operation.
- loopUpLmiActive
The IDSL link has exchnaged the ACT bit with the NT1
and the LMI signalling is active. This is the normal
operating state for frame relay operation. |
| cIdslItucPerfCVs | .1.3.6.1.4.1.9.9.154.1.6.1.1 |
This object specifies the number of coding violations
experienced by the ITU-C since agent reset. |
| cIdslItucPerfESs | .1.3.6.1.4.1.9.9.154.1.6.1.2 |
This object specifies the number of errored seconds
experienced by the ITU-C since agent reset. |
| cIdslItucPerfSESs | .1.3.6.1.4.1.9.9.154.1.6.1.3 |
This object specifies the number of severely errored
seconds experienced by the ITU-C since agent reset. |
| cIdslItucPerfHdlcCVs | .1.3.6.1.4.1.9.9.154.1.6.1.4 |
This object specifies the number of HDLC coding violations
experienced by the ITU-C since agent reset. |
| cIdslItucPerfHdlcAborts | .1.3.6.1.4.1.9.9.154.1.6.1.5 |
This object specifies the number of HDLC aborts experienced
by the ITU-C since agent reset. |
| cIdslItucPerfHdlcAligns | .1.3.6.1.4.1.9.9.154.1.6.1.6 |
This object specifies the number of HDLC frames received by the
ITU-C with a non-integral number of octets since agent reset. |
| cIdslItucPerfHdlcShorts | .1.3.6.1.4.1.9.9.154.1.6.1.7 |
This object specifies the number of short HDLC frames received
by the ITU-C since agent reset. A short HDLC frame contains
less than 5 octets. |
| cIdslItucPerfHdlcLongs | .1.3.6.1.4.1.9.9.154.1.6.1.8 |
This object specifies the number of long HDLC frames received
by the ITU-C since agent reset. A long HDLC frame contains
more than 1500 octets. |
| cIdslItucPerfValidIntervals | .1.3.6.1.4.1.9.9.154.1.6.1.9 |
The number of previous near-end performance data 15-minute
intervals for which data was collected. The value will be <n>
unless the measurement was (re-)started within the last (<n>*15)
minutes, in which case the value will be the number of complete
15-minute intervals for which the agent has at least some data.
In certain cases (e.g., in the case where the agent is a proxy)
it is possible that some intervals are unavailable. In this
case, this interval is the maximum interval number for which
data is available. |
| cIdslItucPerfInvalidIntervals | .1.3.6.1.4.1.9.9.154.1.6.1.10 |
The number of near-end performance data 15-minute intervals in
the range from 0 to cSdslStucPerfValidIntervals for which no
data is available. This object will typically be zero except in
cases where the data for some intervals are not available (e.g.,
in proxy situations). |
| cIdslItucPerfCurr15MinElapsed | .1.3.6.1.4.1.9.9.154.1.6.1.11 |
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value. |
| cIdslItucPerfCurr15MinCVs | .1.3.6.1.4.1.9.9.154.1.6.1.12 |
This object specifies the number of coding violations
experienced by the ITU-C in the current 15-minute interval. |
| cIdslItucPerfCurr15MinESs | .1.3.6.1.4.1.9.9.154.1.6.1.13 |
This object specifies the number of errored seconds
experienced by the ITU-C in the current 15-minute interval. |
| cIdslItucPerfCurr15MinSESs | .1.3.6.1.4.1.9.9.154.1.6.1.14 |
This object specifies the number of severely errored seconds
experienced by the ITU-C in the current 15-minute interval. |
| cIdslItucPerfCurr15MinHdlcCVs | .1.3.6.1.4.1.9.9.154.1.6.1.15 |
This object specifies the number of HDLC coding violations
experienced by the ITU-C in the current 15-minute interval. |
| cIdslItucPerfCurr15MinHdlcAborts | .1.3.6.1.4.1.9.9.154.1.6.1.16 |
This object specifies the number of HDLC aborts experienced
by the ITU-C in the current 15-minute interval. |
| cIdslItucPerfCurr15MinHdlcAligns | .1.3.6.1.4.1.9.9.154.1.6.1.17 |
This object specifies the number of HDLC frames received by
the ITU-C with a non-integral number of octets in the current
15-minute interval. |
| cIdslItucPerfCurr15MinHdlcShorts | .1.3.6.1.4.1.9.9.154.1.6.1.18 |
This object specifies the number of short HDLC frames received
by the ITU-C since agent in the current 15-minute interval. A
short HDLC frame contains less than 5 octets. |
| cIdslItucPerfCurr15MinHdlcLongs | .1.3.6.1.4.1.9.9.154.1.6.1.19 |
This object specifies the number of long HDLC frames received
by the ITU-C since agent in the current 15-minute interval. A
long HDLC frame contains more than 1500 octets. |
| cIdslItucPerfCurr1DayElapsed | .1.3.6.1.4.1.9.9.154.1.6.1.20 |
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value. |
| cIdslItucPerfCurr1DayCVs | .1.3.6.1.4.1.9.9.154.1.6.1.21 |
This object specifies the number of coding violations
experienced by the ITU-C in the current 1-day interval. |
| cIdslItucPerfCurr1DayESs | .1.3.6.1.4.1.9.9.154.1.6.1.22 |
This object specifies the number of errored seconds
experienced by the ITU-C in the current 1-day interval. |
| cIdslItucPerfCurr1DaySESs | .1.3.6.1.4.1.9.9.154.1.6.1.23 |
This object specifies the number of severely errored seconds
experienced by the ITU-C in the current 1-day interval. |
| cIdslItucPerfCurr1DayHdlcCVs | .1.3.6.1.4.1.9.9.154.1.6.1.24 |
This object specifies the number of HDLC coding violations
experienced by the ITU-C in the current 1-day interval. |
| cIdslItucPerfCurr1DayHdlcAborts | .1.3.6.1.4.1.9.9.154.1.6.1.25 |
This object specifies the number of HDLC aborts experienced
by the ITU-C in the current 1-day interval. |
| cIdslItucPerfCurr1DayHdlcAligns | .1.3.6.1.4.1.9.9.154.1.6.1.26 |
This object specifies the number of HDLC frames received by
the ITU-C with a non-integral number of octets in the current
1-day interval. |
| cIdslItucPerfCurr1DayHdlcShorts | .1.3.6.1.4.1.9.9.154.1.6.1.27 |
This object specifies the number of short HDLC frames received
by the ITU-C since agent in the current 1-day interval. A
short HDLC frame contains less than 5 octets. |
| cIdslItucPerfCurr1DayHdlcLongs | .1.3.6.1.4.1.9.9.154.1.6.1.28 |
This object specifies the number of long HDLC frames received
by the ITU-C since agent in the current 1-day interval. A
long HDLC frame contains more than 1500 octets. |
| cIdslItucPerfPrev1DayMoniSecs | .1.3.6.1.4.1.9.9.154.1.6.1.29 |
The amount of time in the previous 1-day interval over which
the performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring data could not be
collected for any reason. |
| cIdslItucPerfPrev1DayCVs | .1.3.6.1.4.1.9.9.154.1.6.1.30 |
This object specifies the number of coding violations
experienced by the ITU-C in the previous 1-day interval. |
| cIdslItucPerfPrev1DayESs | .1.3.6.1.4.1.9.9.154.1.6.1.31 |
This object specifies the number of errored seconds
experienced by the ITU-C in the previous 1-day interval. |
| cIdslItucPerfPrev1DaySESs | .1.3.6.1.4.1.9.9.154.1.6.1.32 |
This object specifies the number of severely errored seconds
experienced by the ITU-C in the previous 1-day interval. |
| cIdslItucPerfPrev1DayHdlcCVs | .1.3.6.1.4.1.9.9.154.1.6.1.33 |
This object specifies the number of HDLC coding violations
experienced by the ITU-C in the previous 1-day interval. |
| cIdslItucPerfPrev1DayHdlcAborts | .1.3.6.1.4.1.9.9.154.1.6.1.34 |
This object specifies the number of HDLC aborts experienced
by the ITU-C in the previous 1-day interval. |
| cIdslItucPerfPrev1DayHdlcAligns | .1.3.6.1.4.1.9.9.154.1.6.1.35 |
This object specifies the number of HDLC frames received by
the ITU-C with a non-integral number of octets in the previous
1-day interval. |
| cIdslItucPerfPrev1DayHdlcShorts | .1.3.6.1.4.1.9.9.154.1.6.1.36 |
This object specifies the number of long HDLC frames received
by the ITU-C since agent in the previous 1-day interval. A
long HDLC frame contains more than 1500 octets. |
| cIdslItucPerfPrev1DayHdlcLongs | .1.3.6.1.4.1.9.9.154.1.6.1.37 |
This object specifies the number of long HDLC frames received
by the ITU-C since agent in the previous 1-day interval. A
long HDLC frame contains more than 1500 octets. |
| cIdslIturPerfCVs | .1.3.6.1.4.1.9.9.154.1.7.1.1 |
This object specifies the number of coding violations
experienced by the ITU-R since agent reset. |
| cIdslIturPerfESs | .1.3.6.1.4.1.9.9.154.1.7.1.2 |
This object specifies the number of errored seconds
experienced by the ITU-R since agent reset. |
| cIdslIturPerfSESs | .1.3.6.1.4.1.9.9.154.1.7.1.3 |
This object specifies the number of severely errored
seconds experienced by the ITU-R since agent reset. |
| cIdslIturPerfValidIntervals | .1.3.6.1.4.1.9.9.154.1.7.1.4 |
The number of previous near-end performance data 15-minute
intervals for which data was collected. The value will be <n>
unless the measurement was (re-)started within the last (<n>*15)
minutes, in which case the value will be the number of complete
15-minute intervals for which the agent has at least some data.
In certain cases (e.g., in the case where the agent is a proxy)
it is possible that some intervals are unavailable. In this
case, this interval is the maximum interval number for which
data is available. |
| cIdslIturPerfInvalidIntervals | .1.3.6.1.4.1.9.9.154.1.7.1.5 |
The number of near-end performance data 15-minute intervals in
the range from 0 to cSdslStucPerfValidIntervals for which no
data is available. This object will typically be zero except in
cases where the data for some intervals are not available (e.g.,
in proxy situations). |
| cIdslIturPerfCurr15MinElapsed | .1.3.6.1.4.1.9.9.154.1.7.1.6 |
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value. |
| cIdslIturPerfCurr15MinCVs | .1.3.6.1.4.1.9.9.154.1.7.1.7 |
This object specifies the number of coding violations
experienced by the ITU-R in the current 15-minute interval. |
| cIdslIturPerfCurr15MinESs | .1.3.6.1.4.1.9.9.154.1.7.1.8 |
This object specifies the number of errored seconds
experienced by the ITU-R in the current 15-minute interval. |
| cIdslIturPerfCurr15MinSESs | .1.3.6.1.4.1.9.9.154.1.7.1.9 |
This object specifies the number of severely errored seconds
experienced by the ITU-R in the current 15-minute interval. |
| cIdslIturPerfCurr1DayElapsed | .1.3.6.1.4.1.9.9.154.1.7.1.10 |
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value. |
| cIdslIturPerfCurr1DayCVs | .1.3.6.1.4.1.9.9.154.1.7.1.11 |
This object specifies the number of coding violations
experienced by the ITU-R in the current 1-day interval. |
| cIdslIturPerfCurr1DayESs | .1.3.6.1.4.1.9.9.154.1.7.1.12 |
This object specifies the number of errored seconds
experienced by the ITU-R in the current 1-day interval. |
| cIdslIturPerfCurr1DaySESs | .1.3.6.1.4.1.9.9.154.1.7.1.13 |
This object specifies the number of severely errored seconds
experienced by the ITU-R in the current 1-day interval. |
| cIdslIturPerfPrev1DayMoniSecs | .1.3.6.1.4.1.9.9.154.1.7.1.14 |
The amount of time in the previous 1-day interval over which
the performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring data could not be
collected for any reason. |
| cIdslIturPerfPrev1DayCVs | .1.3.6.1.4.1.9.9.154.1.7.1.15 |
This object specifies the number of coding violations
experienced by the ITU-R in the previous 1-day interval. |
| cIdslIturPerfPrev1DayESs | .1.3.6.1.4.1.9.9.154.1.7.1.16 |
This object specifies the number of errored seconds
experienced by the ITU-R in the previous 1-day interval. |
| cIdslIturPerfPrev1DaySESs | .1.3.6.1.4.1.9.9.154.1.7.1.17 |
This object specifies the number of severely errored seconds
experienced by the ITU-R in the previous 1-day interval. |
| cIdslItucIntervalNumber | .1.3.6.1.4.1.9.9.154.1.8.1.1 |
The interval in which the statistics were collected, where the
value of 1 represents the most recent interval, and the value of
96 represents the interval collected 24 hours ago. Intervals
2..96 are optional. |
| cIdslItucIntervalValidData | .1.3.6.1.4.1.9.9.154.1.8.1.2 |
This object specifies whether the data for this interval
is valid. |
| cIdslItucIntervalCVs | .1.3.6.1.4.1.9.9.154.1.8.1.3 |
This object specifies the number of coding violations
experienced by the ITU-C in the interval. |
| cIdslItucIntervalESs | .1.3.6.1.4.1.9.9.154.1.8.1.4 |
This object specifies the number of errored seconds
experienced by the ITU-C in the interval. |
| cIdslItucIntervalSESs | .1.3.6.1.4.1.9.9.154.1.8.1.5 |
This object specifies the number of severely errored seconds
experienced by the ITU-C in the interval. |
| cIdslItucIntervalHdlcCVs | .1.3.6.1.4.1.9.9.154.1.8.1.6 |
This object specifies the number of HDLC coding violations
experienced by the ITU-C in the interval. |
| cIdslItucIntervalHdlcAborts | .1.3.6.1.4.1.9.9.154.1.8.1.7 |
This object specifies the number of HDLC aborts experienced
by the ITU-C in the interval. |
| cIdslItucIntervalHdlcAligns | .1.3.6.1.4.1.9.9.154.1.8.1.8 |
This object specifies the number of HDLC frames received by
the ITU-C with a non-integral number of octets in the interval. |
| cIdslItucIntervalHdlcShorts | .1.3.6.1.4.1.9.9.154.1.8.1.9 |
This object specifies the number of short HDLC frames received
by the ITU-C since agent in the interval. A short HDLC frame
contains less than 5 octets. |
| cIdslItucIntervalHdlcLongs | .1.3.6.1.4.1.9.9.154.1.8.1.10 |
This object specifies the number of long HDLC frames received
by the ITU-C since agent in the interval. A long HDLC frame
contains more than 1500 octets. |
| cIdslIturIntervalNumber | .1.3.6.1.4.1.9.9.154.1.9.1.1 |
The interval in which the statistics were collected, where the
value of 1 represents the most recent interval, and the value of
96 represents the interval collected 24 hours ago. Intervals
2..96 are optional. |
| cIdslIturIntervalValidData | .1.3.6.1.4.1.9.9.154.1.9.1.2 |
This object specifies whether the data for this interval
is valid. |
| cIdslIturIntervalCVs | .1.3.6.1.4.1.9.9.154.1.9.1.3 |
This object specifies the number of coding violations
experienced by the ITU-R in the interval. |
| cIdslIturIntervalESs | .1.3.6.1.4.1.9.9.154.1.9.1.4 |
This object specifies the number of errored seconds
experienced by the ITU-R in the interval. |
| cIdslIturIntervalSESs | .1.3.6.1.4.1.9.9.154.1.9.1.5 |
This object specifies the number of severely errored seconds
experienced by the ITU-R in the interval. |
| cIdslLineConfRate | .1.3.6.1.4.1.9.9.154.1.14.1.1 |
This object specifies the desired line rate. |
| cIdslLineConfProtocol | .1.3.6.1.4.1.9.9.154.1.14.1.2 |
This object specifies the layer 2 protocol to be employed
by the line, and more specifically the encapsulation type:
- frf
Specifies the frame relay layer 2 protocol defined by
FRF.8. Observe that the encapsulation can be selected
per virtual circuit.
- pppMuxCisco
Specifies the PPP using Cisco proprietary virtual circuit
multiplexed encapsulation.
- pppMuxIetf
Specifies the PPP using virtual circuit multiplexed
encapsulation defined by RFC-2364.
- pppLlcIetf
Specifies the PPP using the LLC (Link Layer Control)
encapsulation defined by RFC-2364. |
| cIdslLineConfLmiProtocol | .1.3.6.1.4.1.9.9.154.1.14.1.3 |
This object identifies the local inband signaling protocol. |
| cIdslLineConfLmiNetN392 | .1.3.6.1.4.1.9.9.154.1.14.1.4 |
This object specifies the interval between successive status
enquiry messages. |
| cIdslLineConfLmiNetN393 | .1.3.6.1.4.1.9.9.154.1.14.1.5 |
This object specifies the value of the network-side error
threshold. |
| cIdslLineConfLmiNetT392 | .1.3.6.1.4.1.9.9.154.1.14.1.6 |
This object specifies the value of the network-side polling
verification timer. |
| cIdslLineConfUpcIntent | .1.3.6.1.4.1.9.9.154.1.14.1.7 |
This object specifies the default UPC (Usage Parameter Control)
action for connections that do not explicitly specify a UPC
action. |
| cIdslLineConfBcDefault | .1.3.6.1.4.1.9.9.154.1.14.1.8 |
This object specifies the default BC (Committed Burst Size)
for connections that do not explicitly specify a BC. |
| cIdslPppoaPerfRTOs | .1.3.6.1.4.1.9.9.154.1.16.1.1 |
This object specifies the number of frames that could not be
completely reassembled due to a reassembly timeout before being
transmitted over this PPP session since agent reset. |
| cIdslPppoaPerfCVs | .1.3.6.1.4.1.9.9.154.1.16.1.2 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session exhibiting a coding
violation since agent reset. |
| cIdslPppoaPerfShorts | .1.3.6.1.4.1.9.9.154.1.16.1.3 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing less than
5 octets since agent reset. |
| cIdslPppoaPerfLongs | .1.3.6.1.4.1.9.9.154.1.16.1.4 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing more than
1500 octets since agent reset. |
| cIdslPppoaPerfDiscards | .1.3.6.1.4.1.9.9.154.1.16.1.5 |
This object specifies the total number of frames intended for
transmission over this PPP session that were discarded for any
reason since agent reset. |
| cIdslPppoaPerfValidIntervals | .1.3.6.1.4.1.9.9.154.1.16.1.6 |
The number of previous near-end performance data 15-minute
intervals for which data was collected. The value will be <n>
unless the measurement was (re-)started within the last (<n>*15)
minutes, in which case the value will be the number of complete
15-minute intervals for which the agent has at least some data.
In certain cases (e.g., in the case where the agent is a proxy)
it is possible that some intervals are unavailable. In this
case, this interval is the maximum interval number for which
data is available. |
| cIdslPppoaPerfInvalidIntervals | .1.3.6.1.4.1.9.9.154.1.16.1.7 |
The number of near-end performance data 15-minute intervals in
the range from 0 to cSdslStucPerfValidIntervals for which no
data is available. This object will typically be zero except in
cases where the data for some intervals are not available (e.g.,
in proxy situations). |
| cIdslPppoaPerfCurr15MinElapsed | .1.3.6.1.4.1.9.9.154.1.16.1.8 |
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value. |
| cIdslPppoaPerfCurr15MinRTOs | .1.3.6.1.4.1.9.9.154.1.16.1.9 |
This object specifies the number of frames that could not be
completely reassembled due to a reassembly timeout before being
transmitted over this PPP session in the current 15-minute
interval. |
| cIdslPppoaPerfCurr15MinCVs | .1.3.6.1.4.1.9.9.154.1.16.1.10 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session exhibiting a coding
violation in the current 15-minute interval. |
| cIdslPppoaPerfCurr15MinShorts | .1.3.6.1.4.1.9.9.154.1.16.1.11 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing less than
5 octets in the current 15-minute interval. |
| cIdslPppoaPerfCurr15MinLongs | .1.3.6.1.4.1.9.9.154.1.16.1.12 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing more than
1500 octets in the current 15-minute interval. |
| cIdslPppoaPerfCurr15MinDiscards | .1.3.6.1.4.1.9.9.154.1.16.1.13 |
This object specifies the total number of frames intended for
transmission over this PPP session that were discarded for any
reason in the current 15-minute interval. |
| cIdslPppoaPerfCurr1DayElapsed | .1.3.6.1.4.1.9.9.154.1.16.1.14 |
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value. |
| cIdslPppoaPerfCurr1DayRTOs | .1.3.6.1.4.1.9.9.154.1.16.1.15 |
This object specifies the number of frames that could not be
completely reassembled due to a reassembly timeout before being
transmitted over this PPP session in the current 1-day
interval. |
| cIdslPppoaPerfCurr1DayCVs | .1.3.6.1.4.1.9.9.154.1.16.1.16 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session exhibiting a coding
violation in the current 1-day interval. |
| cIdslPppoaPerfCurr1DayShorts | .1.3.6.1.4.1.9.9.154.1.16.1.17 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing less than
5 octets in the current 1-day interval. |
| cIdslPppoaPerfCurr1DayLongs | .1.3.6.1.4.1.9.9.154.1.16.1.18 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing more than
1500 octets in the current 1-day interval. |
| cIdslPppoaPerfCurr1DayDiscards | .1.3.6.1.4.1.9.9.154.1.16.1.19 |
This object specifies the total number of frames intended for
transmission over this PPP session that were discarded for any
reason in the current 1-day interval. |
| cIdslPppoaPerfPrev1DayMoniSecs | .1.3.6.1.4.1.9.9.154.1.16.1.20 |
The amount of time in the previous 1-day interval over which
the performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring data could not be
collected for any reason. |
| cIdslPppoaPerfPrev1DayRTOs | .1.3.6.1.4.1.9.9.154.1.16.1.21 |
This object specifies the number of frames that could not be
completely reassembled due to a reassembly timeout before being
transmitted over this PPP session in the previous 1-day
interval. |
| cIdslPppoaPerfPrev1DayCVs | .1.3.6.1.4.1.9.9.154.1.16.1.22 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session exhibiting a coding
violation in the previous 1-day interval. |
| cIdslPppoaPerfPrev1DayShorts | .1.3.6.1.4.1.9.9.154.1.16.1.23 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing less than
5 octets in the previous 1-day interval. |
| cIdslPppoaPerfPrev1DayLongs | .1.3.6.1.4.1.9.9.154.1.16.1.24 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing more than
1500 octets in the previous 1-day interval. |
| cIdslPppoaPerfPrev1DayDiscards | .1.3.6.1.4.1.9.9.154.1.16.1.25 |
This object specifies the total number of frames intended for
transmission over this PPP session that were discarded for any
reason in the previous 1-day interval. |
| cIdslPppoaIntervalNumber | .1.3.6.1.4.1.9.9.154.1.17.1.1 |
The interval in which the statistics were collected, where the
value of 1 represents the most recent interval, and the value of
96 represents the interval collected 24 hours ago. Intervals
2..96 are optional. |
| cIdslPppoaIntervalValidData | .1.3.6.1.4.1.9.9.154.1.17.1.2 |
This object specifies whether the data for this interval
is valid. |
| cIdslPppoaIntervalRTOs | .1.3.6.1.4.1.9.9.154.1.17.1.3 |
This object specifies the number of frames that could not be
completely reassembled due to a reassembly timeout before being
transmitted over this PPP session in the interval. |
| cIdslPppoaIntervalCVs | .1.3.6.1.4.1.9.9.154.1.17.1.4 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session exhibiting a coding
violation in the interval. |
| cIdslPppoaIntervalShorts | .1.3.6.1.4.1.9.9.154.1.17.1.5 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing less than
5 octets in the interval. |
| cIdslPppoaIntervalLongs | .1.3.6.1.4.1.9.9.154.1.17.1.6 |
This object specifies the number of reassembled frames intended
for transmission over this PPP session containing more than
1500 octets in the interval. |
| cIdslPppoaIntervalDiscards | .1.3.6.1.4.1.9.9.154.1.17.1.7 |
This object specifies the total number of frames intended for
transmission over this PPP session that were discarded for any
reason in the interval. |
| cIdslPppoaMapIfIndex | .1.3.6.1.4.1.9.9.154.1.18.1.1 |
The ifIndex associated with the pseudo-ATM interface
onto which the IDSL interface is being mapped. |
| cIdslPppoaMapVpi | .1.3.6.1.4.1.9.9.154.1.18.1.2 |
The VPI (Virtual Path Identifier) associated with the ATM
VCL onto which the PPP session is being mapped. |
| cIdslPppoaMapVci | .1.3.6.1.4.1.9.9.154.1.18.1.3 |
The VCI (Virtual Circuit Identifier) associated with the
ATM VCL onto which the PPP session is being mapped. |
| Table |
| cIdslLineTable | .1.3.6.1.4.1.9.9.154.1.1 |
This table contains the common attributes describing both ends
of IDSL lines supported by the system. |
| cIdslItucPhysTable | .1.3.6.1.4.1.9.9.154.1.2 |
This table contains physical-layer parameters for ITU-C class
devices supported by the system. |
| cIdslItucPerfDataTable | .1.3.6.1.4.1.9.9.154.1.6 |
This table contains physical-layer statistics for ITU-C class
devices supported by the system. |
| cIdslIturPerfDataTable | .1.3.6.1.4.1.9.9.154.1.7 |
This table contains physical-layer statistics for ITU-R class
devices supported by the system. |
| cIdslItucIntervalTable | .1.3.6.1.4.1.9.9.154.1.8 |
This table contains physical-layer statistics intervals for
ITU-C class devices supported by the system. |
| cIdslIturIntervalTable | .1.3.6.1.4.1.9.9.154.1.9 |
This table contains physical-layer statistics intervals for
ITU-R class devices supported by the system. |
| cIdslLineConfProfileTable | .1.3.6.1.4.1.9.9.154.1.14 |
This table extends the adslLineConfProfileTable and contains
IDSL line configuration information. |
| cIdslPppoaPerfDataTable | .1.3.6.1.4.1.9.9.154.1.16 |
This table contains PPPoA statistics for those ITU-C class
devices configured for PPP operation. |
| cIdslPppoaIntervalTable | .1.3.6.1.4.1.9.9.154.1.17 |
This table contains PPPoA statistics intervals for those ITU-C
class devices configured for PPP operation. |
| cIdslPppoaMapTable | .1.3.6.1.4.1.9.9.154.1.18 |
This table defines the mapping between PPP sessions and
ATM VC. |
| Object Identifier |
| ciscoIdslLineMIB | .1.3.6.1.4.1.9.9.154 |
This MIB module describes IDSL (ISDN Digital Line Subscriber)
line interfaces. The structure of this module resembles that
of the ADSL-LINE-MIB (RFC-2662). Observe that the tables in
this module do not necessarily extend the tables defined by the
ADSL-LINE-MIB. Currently, only those tables that contain
configuration information extend the profile tables defined by
the ADSL-LINE-MIB. This allows the management client to define
xDSL configuration profiles that apply across all xDSL modems,
independent of the technology being utilized by the modem.
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
ADSL - Asymmetric Digital Subscriber Line.
ATM - Asynchronous Transfer Mode.
BRITE - Basic Rate Interface Terminal Extender.
CV - Coding Violation.
DLC - Data Link Connection.
DSL - Digital Subscriber Line.
ES - Error Second.
IDSL - IDSN Digital Subscriber Loop.
ITU-C - IDSL Transceiver Unit, Central Office end.
ITU-R - IDSL Transceiver Unit, Remote terminal end.
LMI - Link Management Interface.
LOF - Loss Of Frame.
LOS - Loss Of Signal.
NT - Network Terminator.
PPP - Point-to-Point Protocol.
PPPoA - PPP over ATM.
SES - Severely Errored Second.
*** DEFINITIONS ***
CODING VIOLATION
A coding violation occurs when the incoming signal exhibits
a CRC anomaly.
DOWNSTREAM
The flow of data in the direction from the ITU-C to ITU-R.
ERRORED SECOND
A second with one or more coding violations.
LINE RATE
The total data rate supported by a line. Observe that the
payload rate is equal the line rate for the earliest
implementations of IDSL. However, the payload rate maybe
less than the line rate for future implementations.
SEVERELY ERRORED SECOND
A second with 3 or more coding violations.
UPSTREAM
The flow of data in the direction from the ATU-R to ATU-C. |
| ciscoIdslLineMIBObjects | .1.3.6.1.4.1.9.9.154.1 |
| ciscoIdslLineMIBNotificationsPrefix | .1.3.6.1.4.1.9.9.154.2 |
| ciscoIdslLineMIBNotifications | .1.3.6.1.4.1.9.9.154.2.0 |
| ciscoIdslLineMIBConformance | .1.3.6.1.4.1.9.9.154.3 |
| ciscoIdslLineMIBCompliances | .1.3.6.1.4.1.9.9.154.3.1 |
| ciscoIdslLineMIBGroups | .1.3.6.1.4.1.9.9.154.3.2 |
| Group |
| cIdslBasicGroup | .1.3.6.1.4.1.9.9.154.3.2.1 |
A collection of managed objects defining the basic operation
of an IDSL line. |
| cIdslPM15MinIntervalGroup | .1.3.6.1.4.1.9.9.154.3.2.2 |
A collection of managed objects defining performance data
collection capability using 15-minute intervals. |