SNMP MIB Search

A table of SS7 events generated and received
by a specific signalling point.

An entry is added to this table for each application
service event associated with a particular
application service.  The table contains the latest
number of events defined by the cgsp2EventMaxEntries
object.  Once the table is full, the oldest entry is
removed and a new entry is created to accommodate
the new event.

An entry is added to this table for each application
service process event associated with a particular
application service process.  The table contains
the latest number of events defined by the
cgsp2EventMaxEntries object.  Once the table is full,
the oldest entry is removed and a new entry is created
to accommodate the new event.

An MTP3 event that was previously generated by this
signalling point.
An entry is added to this table for each SS7 event
generated on the managed system.  The table contains
the latest number of events defined by the
cgsp2EventMaxEntries object.
Once the table is full, the oldest entry is removed and
a new entry is created to accommodate the new event.

An entry is added to this table for each point-code
event.  The table contains the latest number of events
defined by the cgsp2EventMaxEntries object.  Once the
table is full, the oldest entry is removed and a new
entry is created to accommodate the new event.

Each entry define information relate to a Quality
of Service class as needed to transport SS7 packets
using SCTP/IP.

A list of attributes of the local-peer.

A list of attributes of the Local IP addresses for
the local-peer.

The type of event history as follows.
'as'   - Application Service
'asp'  - Application Service Process
'mtp3' - Message Transport Protocol Level 3
'pc'   - Point-code 

The number of events that have been logged.

The number of events that could not be logged
due to unavailable resources.

The upper limit on the number of events that the
event history can contain. A value of 0 will
prevent any event history from being retained.  When
this table is full, the oldest entry will be deleted
as a new entry is added.

This object specifies the maximum number of events
that can be specified for cgsp2EventMaxEntries
object.

The application server name.  This name has only
local significance.

Index into application service event history.

A brief description of the application service event
in text format.

The value of sysUpTime at the time of the application
service event was processed.

The application server process name.  This name has
only local significance.

Index into application service process event history.

A brief description of the application service process
event in text format.

The value of sysUpTime at the time of the application
service process event was received.

Index into MTP3 event history.

A brief description of the SS7 event in text
format.  Each event provides information of state
transitions specific to the MTP3 protocol.

The value of sysUpTime at the time of the event
was received by MTP3 layer.

The point code number.

Index into point-code event history.

A brief description of the point-code event in text
format.

The value of sysUpTime at the time of the point-code
event was received.

The quality of service class that can be defined to
transport SS7 Packets using SCTP/IP.

Enumerated list of QoS type that can be defined.
A value ipPrecedence suggests that IP Type of
Service (TOS) is based on cgsp2QosPrecedenceValue.
A value ipDscp suggests that IP Type of Service
(TOS) is based on cgsp2QosIpDscp.

A value to assign to the IP TOS  bits in the
IP datagram that carries one or more SS7 packets.
The IP Precedence value is specified if
cgsp2QosType is ipPrecedence, otherwise it is -1.

DiffServ CodePoint (DSCP) value to assign to the IP
TOS bits in the IP datagram that carries one or more
SS7 packets.
DSCP provides scalable mechanisms to classify packets
into groups or classes that have similar QoS
requirements and then gives these groups the required
treatment at every hop in the network.
The DSCP value is specified if cgsp2QosType
is ipDscp, otherwise it is -1.

ITP Access lists can be used to use information
specific to SS7 packets to assign an Qos class.
A value of zero indicates that no access control
list is present.

The object is used by a management station to
create or delete the row entry in cgsp2QosTable
following the RowStatus textual convention.

The local SCTP port for this local-peer. The value
zero is not allowed.

This value is used to specify to which slot the local-peer
will be offloaded. A value of negative one indicates the
local-peer is not offloaded.

The object is used by a management station to
create or delete a row entry in
cgsp2LocalPeerTable following the RowStatus
textual convention.

This object specifies the index for the
instance's IP address.

This object contains the type of the local
IP address used to create the association.

This object contains the local IP address used to
create association associations.

The object is used by a management station to
create or delete the row entry in
cgsp2LpIpAddrTable following the RowStatus
textual convention.

A table used to provide information about
all types of events on a signalling point.

A table of Application Service events generated per
signalling point.

A table of application service process events
generated per signalling point.

A table of MTP3 events generated per signalling
point.

A table of point-code events generated per
signalling point.

A table of information related to the defining
Quality of Service to transport SS7 packets using
SCTP/IP.
Entries are added to this table via
cgsp2QosRowStatus in accordance with the
RowStatusconvention.

A local-peer table used establish SCTP associations.
The port will be used to receive and sent requests
to establish associations.
Entries are added to this table via
cgsp2LocalPeerRowStatus in accordance with the RowStatus
convention.

A table of Local IP addresses group together to
form the local-peer used to establish SCTP
associations.
For a given local-peer, there can be multiple local
IP addresses which are used for the multi-homing
feature of the SCTP associations.  This table lists
out the configured local IP addresses.
Entries are added to this table via
cgsp2LocalPeerRowStatus in accordance with
the RowStatus convention.

The MIB for providing information specified
in ITU Q752 Monitoring and Measurements for
signalling System No. 7(SS7) Network.
This information can be used to manage messages
transported over SS7 Network via Cisco IP
Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signalling point.
The relevant ITU documents describing this technology
is the ITU Q series, including ITU Q.700: Introduction
to CCITT signalling System No. 7 and ITU Q.701
Functional description of the message transfer part
(MTP) of signalling System No. 7.
The ITP Quality of Service (QoS) model allows the
definition of 8 QoS classes, 0 through 7.
QoS classes can be assigned only SCTP links.
Only one QoS class can be assigned to an SCTP link.
Class 0 will be designated as the default class.
Packets that are not classified to a designated QoS
class will get assigned to the default class. Each
provisioned QoS class can be assigned an IP precedence
value or a Differential Services Code Point (DSCP).
The default  class is initialized to IP precedence
zero (0). The default class initial TOS setting can
be changed through the command line interface. The
Type of Service (TOS) byte in the IP header will be
set to the IP precedence or DSCP that is assigned to
class. Every packet forwarded over an SCTP link that
was provisioned for a given QoS class will have the
TOS byte set.

SS7 Event objects.

SS7 Quality of Service objects.

SS7 Local Peer objects.