| Scalar Object |
| oamLoopbackPingEntry | .1.3.6.1.4.1.9.10.15.1.1.1 |
A OAM loopback request entry.
A management station wishing to create an entry should
first generate a pseudo-random serial number to be used
as the index to this sparse table. The NMS should
then create the associated instance of the row status
and row owner objects. It must also, either in the same
or in successive PDUs, create the associated instances
specifying the VPI and VCI values. It should also modify
the default values for the other configuration objects
if the defaults are not appropriate.
Once the appropriate instance of all the configuration
objects have been created, either by an explicit SNMP
set request or by default, the row status should be set
to active to initiate the request. Note that this entire
procedure may be initiated via a single set request which
specifies a row status of createAndGo as well as specifies
valid values for the non-defaulted configuration objects.
Once the OAM sequence has been activated, it cannot be
stopped -- it will run until the configured number of
cells have been sent.
Once the sequence completes, the management station should
retrieve the values of the status objects of interest, and
should then delete the entry. In order to prevent old
entries from clogging the table, entries will be aged out,
but an entry will never be deleted within 5 minutes of
completing. |
| oamLoopbackSegEndPointEntry | .1.3.6.1.4.1.9.10.15.1.2.1 |
An entry in the segment endpoint table. |
| Tabular Object |
| oamLoopbackPingSerialNumber | .1.3.6.1.4.1.9.10.15.1.1.1.1 |
Object which identifies a unique entry in the
oamLoopbackPingTable. A management station wishing
to initiate a OAM-loopback operation should use a
pseudo-random value for this object when creating
or modifying an instance of an oamLoopbackPingEntry.
The RowStatus semantics of the oamLoopbackPingEntryStatus
object will prevent access conflicts. |
| oamLoopbackPingInterface | .1.3.6.1.4.1.9.10.15.1.1.1.2 |
The interface of the connection on which OAM loopbacks are
to be sent. Once an instance of this object is created, its
value can not be changed. The value specified for this object
must equate to a value of ifIndex in the ifTable. |
| oamLoopbackPingVpi | .1.3.6.1.4.1.9.10.15.1.1.1.3 |
The VPI of the connection on which OAM loopbacks are
to be sent.
Once an instance of this object is created, its
value can not be changed. |
| oamLoopbackPingVci | .1.3.6.1.4.1.9.10.15.1.1.1.4 |
Either -1 or the VCI of the connection on which F5 OAM
loopback cells are to be sent.
If the value of this object is -1, then an F4 OAM loopback
cells will be sent on the VPC indicated by oamLoopbackPingVpi.
An instance of this object cannot be created until the
associated instance of oamLoopbackPingVpi is created.
Once an instance of this object is created, its
value can not be changed. |
| oamLoopbackPingType | .1.3.6.1.4.1.9.10.15.1.1.1.5 |
The type of OAM loopback to be performed. |
| oamLoopbackPingLocation | .1.3.6.1.4.1.9.10.15.1.1.1.6 |
The value to be placed in the 'Loopback Location ID' field
of the OAM loopback cell. If this value is less than 16
octets in length, then it will be appended with zero-valued
octets to form the required 96-bit value. One possibility
is to set this value to the IP-address of the node at which
the OAM loopback is to occur.
An instance of this object cannot be created until the
associated instance of oamLoopbackPingVpi is created.
Once an instance of this object is created, its
value can not be changed. |
| oamLoopbackPingLocationFlag | .1.3.6.1.4.1.9.10.15.1.1.1.7 |
Specifies what kind of information is embedded into the
oamLoopbackPingLocation string. This flag is ignored when
oamLoopbackPingType is set to segment. |
| oamLoopbackPingCount | .1.3.6.1.4.1.9.10.15.1.1.1.8 |
Specifies the number of OAM loopback cells to send to the
target in this sequence. |
| oamLoopbackPingTimeout | .1.3.6.1.4.1.9.10.15.1.1.1.9 |
Specifies the amount of time to wait for a response to a
transmitted OAM loopback cells before declaring the OAM
loopback cells as 'dropped.' |
| oamLoopbackPingDelay | .1.3.6.1.4.1.9.10.15.1.1.1.10 |
Specifies the minimum amount of time to wait before sending
the next OAM loopback cell in a sequence after receiving a
response or declaring a timeout for a previous OAM cell. The
actual delay may be greater due to internal task scheduling. |
| oamLoopbackPingTrapOnCompletion | .1.3.6.1.4.1.9.10.15.1.1.1.11 |
Specifies whether or not a oamLoopbackPingCompletion trap
should be issued on completion of the sequence of OAM loopback
cells. If such a trap is desired, it is the responsibility of
the management entity to ensure that the SNMP administrative
model is configured in such a way as to allow the trap to be
delivered. |
| oamLoopbackPingSentCells | .1.3.6.1.4.1.9.10.15.1.1.1.12 |
The number of OAM loopback cells that have been sent to the
target in this sequence. |
| oamLoopbackPingReceivedCells | .1.3.6.1.4.1.9.10.15.1.1.1.13 |
The number of OAM loopback cells that have been received
from the target in this sequence. |
| oamLoopbackPingMinRtt | .1.3.6.1.4.1.9.10.15.1.1.1.14 |
The minimum round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
response in a sequence is received. |
| oamLoopbackPingAvgRtt | .1.3.6.1.4.1.9.10.15.1.1.1.15 |
The average round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
response in a sequence is received. |
| oamLoopbackPingMaxRtt | .1.3.6.1.4.1.9.10.15.1.1.1.16 |
The maximum round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
response in a sequence is received. |
| oamLoopbackPingCompleted | .1.3.6.1.4.1.9.10.15.1.1.1.17 |
Set to true when all the OAM loopback cells in this sequence
have been either responded to or timed out. |
| oamLoopbackPingEntryOwner | .1.3.6.1.4.1.9.10.15.1.1.1.18 |
The entity that configured this entry. |
| oamLoopbackPingEntryStatus | .1.3.6.1.4.1.9.10.15.1.1.1.19 |
The status of this table entry. Once the entry status is
set to active, the associate entry cannot be modified until
the sequence completes (oamLoopbackPingCompleted is true). |
| oamLoopbackPingDir | .1.3.6.1.4.1.9.10.15.1.1.1.20 |
This object set the traveling direction of the OAM
segment loopback cells which are injected to the
connection endpoint. |
| oamLoopbackPingOperStatus | .1.3.6.1.4.1.9.10.15.1.1.1.21 |
This object indicates the ping test status. |
| oamLoopbackPingExecTime | .1.3.6.1.4.1.9.10.15.1.1.1.22 |
The value of sysUpTime when the MIB object
is created which triggers the loppback ping test. |
| oamLoopbackPingMinRttuSec | .1.3.6.1.4.1.9.10.15.1.1.1.23 |
The minimum round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
response in a sequence is received.
Notes: this object is the same as oamLoopbackPingMinRtt but
the unit is in microseconds instead of milliseconds. |
| oamLoopbackPingAvgRttuSec | .1.3.6.1.4.1.9.10.15.1.1.1.24 |
The average round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
response in a sequence is received.
Notes: this object is the same as oamLoopbackPingAvgRtt but
the unit is in microseconds instead of milliseconds. |
| oamLoopbackPingMaxRttuSec | .1.3.6.1.4.1.9.10.15.1.1.1.25 |
The maximum round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
response in a sequence is received.
Notes: this object is the same as oamLoopbackPingMaxRtt but
the unit is in microseconds instead of milliseconds. |
| oamLoopSegVpi | .1.3.6.1.4.1.9.10.15.1.2.1.1 |
The VPI value of a VP or VC connection. |
| oamLoopSegVci | .1.3.6.1.4.1.9.10.15.1.2.1.2 |
The VCI value of VC connection. For a VPC connection,
the VCI value is 0. |
| oamLoopSegRowStatus | .1.3.6.1.4.1.9.10.15.1.2.1.3 |
To create, delete an OAM segment entry. Only
the value 'active', 'createAndGo', and 'destroy' are
supported.
If the connection endpoint does not exist, the entry could
not be created.
If the associated ATM connection is de-routed or deleted, the
connection endpoint is gone. The associated row entry will be
removed automatically. |
| Table |
| oamLoopbackPingTable | .1.3.6.1.4.1.9.10.15.1.1 |
A table of OAM loopback request entries. (This table
is similar to the CISCO-PING-MIB.) |
| oamLoopbackSegEndPointTable | .1.3.6.1.4.1.9.10.15.1.2 |
This table contains a list of OAM loopback segment
endpoints.
When the endpoint is an OAM segment endpoint, it is able to
send ATM segment loop back cells or loop back the cells to
the originator which initiates the OAM loop back ping test.
The provisioning of this table is required if the loopback
ping test type (oamLoopbackPingType) in oamLoopbackPingTable
is 'segment', and the endpoint under test or the remote ping
endpoint is not OAM segment loopback endpoints. |
| Trap |
| oamLoopbackPingCompletionTrap | .1.3.6.1.4.1.9.10.15.2.0.1 |
A oamLoopbackPingCompleted trap is sent at the completion
of a sequence of OAM loopback cells if such a trap was
requested when the sequence was initiated. |
| Object Identifier |
| ciscoOamPingMIB | .1.3.6.1.4.1.9.10.15 |
A MIB module for invoking OAM loopback Ping on ATM
connections. |
| ciscoOamPingMIBObjects | .1.3.6.1.4.1.9.10.15.1 |
| oamLoopbackPingMIBTrapPrefix | .1.3.6.1.4.1.9.10.15.2 |
| oamLoopbackPingMIBTraps | .1.3.6.1.4.1.9.10.15.2.0 |
| ciscoOamPingMIBConformance | .1.3.6.1.4.1.9.10.15.3 |
| ciscoOamPingMIBCompliances | .1.3.6.1.4.1.9.10.15.3.1 |
| ciscoOamPingMIBGroups | .1.3.6.1.4.1.9.10.15.3.2 |
| Group |
| ciscoOamPingMIBGroup | .1.3.6.1.4.1.9.10.15.3.2.1 |
A collection of objects providing the ability to invoke
the sending of OAM loopback cells. |
| ciscoOamPing2MIBGroup | .1.3.6.1.4.1.9.10.15.3.2.2 |
A collection of objects providing the ability to invoke
the sending of OAM loopback cells. |
| oamLoopbackNotificationsGroup | .1.3.6.1.4.1.9.10.15.3.2.4 |
A collection of notifications for OAM loopback ping test. |
| ciscoOamPingSegEndPointGroup | .1.3.6.1.4.1.9.10.15.3.2.3 |
A collection of objects providing the ability to provision
ATM connection endpoints to be OAM segment loopback endpoint. |
| ciscoOamPingMIBGroupRev3 | .1.3.6.1.4.1.9.10.15.3.2.5 |
A collection of objects providing the ability to invoke
the sending of OAM loopback cells. |