| Scalar Object |
| cvAtmCallHistoryEntry | .1.3.6.1.4.1.9.10.35.1.1.1.1 |
The information regarding a single ATM call leg.
An entry of this table is created when its associated call
history entry in the IETF Dial Control MIB is created and
the call history entry contains information for the call
establishment to the peer on the data network backbone via
a voice over ATM peer.
Th the IETF Dial Control MIB is deleted. |
| cvAtmCallActiveEntry | .1.3.6.1.4.1.9.10.35.1.2.1.1 |
The information regarding a single ATM call leg.
An entry of this table is created when its associated call
active entry in the IETF Dial Control MIB is created. The
call active entry contains information for the call
establishment to the peer on the data network backbone via
a voice over ATM peer.
The entry is deleted when its associated call active entry
in the IETF Dial Control MIB is deleted. |
| cvAtmPeerCfgEntry | .1.3.6.1.4.1.9.10.35.1.3.1.1 |
A single ATM specific Peer. One entry per ATM encapsulation.
The entry is created when its associated 'voiceOverATM(152)'
encapsulation ifEntry is created.
This entry is deleted when its associated ifEntry is deleted. |
| Tabular Object |
| cvAtmCallHistoryConnectionId | .1.3.6.1.4.1.9.10.35.1.1.1.1.1 |
The global call identifier for the ATM call. |
| cvAtmCallHistoryVpi | .1.3.6.1.4.1.9.10.35.1.1.1.1.2 |
The VPI used for this ATM connection. |
| cvAtmCallHistoryVci | .1.3.6.1.4.1.9.10.35.1.1.1.1.3 |
The VCI used for this ATM connection. |
| cvAtmCallHistoryLowerIfName | .1.3.6.1.4.1.9.10.35.1.1.1.1.4 |
The ifName of the ATM interface associated with this
call. |
| cvAtmCallHistorySessionTarget | .1.3.6.1.4.1.9.10.35.1.1.1.1.5 |
The object specifies the session target of the peer that
was used for the voice over ATM call. A zero length string
indicates that the value is unavailable. |
| cvAtmCallHistorySubchannelID | .1.3.6.1.4.1.9.10.35.1.1.1.1.6 |
The subchannel used for this ATM connection. |
| cvAtmCallHistorySessionProtocol | .1.3.6.1.4.1.9.10.35.1.1.1.1.7 |
Specifies the session protocol used on this call. |
| cvAtmCallHistoryCalledNumber | .1.3.6.1.4.1.9.10.35.1.1.1.1.8 |
Specifes the number called for trunk connection calls. A
zero length string indicates that this data is unavailable. |
| cvAtmCallHistoryDtmfRelay | .1.3.6.1.4.1.9.10.35.1.1.1.1.9 |
Specifies if Dtmf Relay was enabled for the call. |
| cvAtmCallHistoryUseSeqNumbers | .1.3.6.1.4.1.9.10.35.1.1.1.1.10 |
Specifies if Sequence Numbers were used on the voice data
packets. |
| cvAtmCallActiveConnectionId | .1.3.6.1.4.1.9.10.35.1.2.1.1.1 |
The global call identifier for the ATM call. |
| cvAtmCallActiveVpi | .1.3.6.1.4.1.9.10.35.1.2.1.1.2 |
The VPI used for this ATM connection. |
| cvAtmCallActiveVci | .1.3.6.1.4.1.9.10.35.1.2.1.1.3 |
The VCI used for this ATM connection. |
| cvAtmCallActiveLowerIfName | .1.3.6.1.4.1.9.10.35.1.2.1.1.4 |
The ifName of the ATM interface associated with this
call. |
| cvAtmCallActiveSessionTarget | .1.3.6.1.4.1.9.10.35.1.2.1.1.5 |
The object specifies the session target of the peer that
is used for the voice over ATM call. A null string indicates
that the value is unavailable. |
| cvAtmCallActiveSubchannelID | .1.3.6.1.4.1.9.10.35.1.2.1.1.6 |
The subchannel used for this ATM connection. |
| cvAtmCallActiveSessionProtocol | .1.3.6.1.4.1.9.10.35.1.2.1.1.7 |
Specifies the session protocol being used on this call. |
| cvAtmCallActiveCalledNumber | .1.3.6.1.4.1.9.10.35.1.2.1.1.8 |
Specifes the number called for trunk connection calls. A
null string indicates that this data is unavailable. |
| cvAtmCallActiveDtmfRelay | .1.3.6.1.4.1.9.10.35.1.2.1.1.9 |
Specifies if Dtmf Relay is enabled for the call. |
| cvAtmCallActiveUseSeqNumbers | .1.3.6.1.4.1.9.10.35.1.2.1.1.10 |
Specifies if Sequence Numbers are used on the voice data
packets. |
| cvAtmPeerCfgSessionProtocol | .1.3.6.1.4.1.9.10.35.1.3.1.1.1 |
The object specifies the session protocol to be used
for Internet call between local and remote router via
ATM backbone. |
| cvAtmPeerCfgInterfaceName | .1.3.6.1.4.1.9.10.35.1.3.1.1.2 |
The object specifies the ifName on which the call will go
out.
A zero length string indicates that no interface has been
assigned. |
| cvAtmPeerCfgVpi | .1.3.6.1.4.1.9.10.35.1.3.1.1.3 |
The VPI used for this ATM connection. |
| cvAtmPeerCfgVci | .1.3.6.1.4.1.9.10.35.1.3.1.1.4 |
The VCI used for this ATM connection. |
| cvAtmPeerCfgVcName | .1.3.6.1.4.1.9.10.35.1.3.1.1.5 |
The VC Name used for this ATM connection. |
| cvAtmPeerCfgCoderRate | .1.3.6.1.4.1.9.10.35.1.3.1.1.6 |
This object specifies the default voice coder rate of speech for
the ATM peer. |
| cvAtmPeerCfgCodecBytes | .1.3.6.1.4.1.9.10.35.1.3.1.1.7 |
This object specifies the payload size for the voice packets
to be transmitted during the call. |
| cvAtmPeerCfgFaxRate | .1.3.6.1.4.1.9.10.35.1.3.1.1.8 |
This object specifies the default transmit rate of FAX for the
ATM peer. If the value of this object is 'none', then
the Fax relay feature is disabled; otherwise the Fax relay
feature is enabled. |
| cvAtmPeerCfgFaxBytes | .1.3.6.1.4.1.9.10.35.1.3.1.1.9 |
This object specifies the payload size for the fax packets
to be transmitted during the call. |
| cvAtmPeerCfgInBandSignaling | .1.3.6.1.4.1.9.10.35.1.3.1.1.10 |
This object specifies the type of in-band signaling used
between the two end points of the call and is used by the
router to determine how to interpret the ABCD signaling bits
sent as part of the voice payload data. |
| cvAtmPeerCfgVADEnable | .1.3.6.1.4.1.9.10.35.1.3.1.1.11 |
This object specifies whether or not VAD (Voice Activity
Detection) is enabled. If the object value is 'false', then
the voice data is continuously transmitted to ATM backbone. |
| cvAtmPeerCfgUseSeqNumbers | .1.3.6.1.4.1.9.10.35.1.3.1.1.12 |
This object specifies whether or not Sequence Numbers are
generated on voice packets. |
| cvAtmPeerCfgDtmfRelay | .1.3.6.1.4.1.9.10.35.1.3.1.1.13 |
This object specifies whether or not Dtmf Relay is enabled.
If it is then dtmf digits are transported as FRF11 Annex
C packets, instead of being encoded as speech. |
| Table |
| cvAtmCallHistoryTable | .1.3.6.1.4.1.9.10.35.1.1.1 |
This table is the ATM extension to the call history table of
IETF Dial Control MIB. It contains ATM call leg information
about specific voice over ATM call. |
| cvAtmCallActiveTable | .1.3.6.1.4.1.9.10.35.1.2.1 |
This table is the ATM extension to the active call table of
IETF Dial Control MIB. It contains ATM call leg information
about specific voice over ATM call. |
| cvAtmPeerCfgTable | .1.3.6.1.4.1.9.10.35.1.3.1 |
The table contains the Voice over ATM (ATM) peer specific
information that is required to accept or place voice calls
via the ATM backbone with the session protocol specified
in cvAtmPeerCfgSessionProtocol. |
| Object Identifier |
| ciscoVoiceAtmDialControlMIB | .1.3.6.1.4.1.9.10.35 |
This MIB module enhances the IETF Dial Control MIB
(RFC2128) by providing ATM management information over a
data network. |
| ciscoVoiceAtmDialControlMIBObjects | .1.3.6.1.4.1.9.10.35.1 |
| cvAtmCallHistory | .1.3.6.1.4.1.9.10.35.1.1 |
| cvAtmCallActive | .1.3.6.1.4.1.9.10.35.1.2 |
| cvAtmDialPeer | .1.3.6.1.4.1.9.10.35.1.3 |
| ciscoVoiceAtmDialControlMIBNotificationPrefix | .1.3.6.1.4.1.9.10.35.2 |
| ciscoVoiceAtmDialControlMIBNotifications | .1.3.6.1.4.1.9.10.35.2.0 |
| ciscoVoiceAtmDialControlMIBConformance | .1.3.6.1.4.1.9.10.35.3 |
| ciscoVoiceAtmDialControlMIBCompliances | .1.3.6.1.4.1.9.10.35.3.1 |
| ciscoVoiceAtmDialControlMIBGroups | .1.3.6.1.4.1.9.10.35.3.2 |
| Group |
| cvAtmCallHistoryGroup | .1.3.6.1.4.1.9.10.35.3.2.1 |
A collection of objects providing the ATM Call History
entry capability. |
| cvAtmCallActiveGroup | .1.3.6.1.4.1.9.10.35.3.2.2 |
A collection of objects providing the ATM Call Active
entry capability. |
| cvAtmPeerCfgGroup | .1.3.6.1.4.1.9.10.35.3.2.3 |
A collection of objects providing the ATM Dialpeer
capability. These objects have been implemented as
read-only. |