SNMP MIB Search

Return to vendor list
View mib
Download mib file
Mib: CISCO-VOICE-COMMON-DIAL-CONTROL-MIB
Version: 1


Objects
Scalar Object
cvCommonDcCallActiveEntry.1.3.6.1.4.1.9.10.55.1.1.1.1
The common information regarding a single network call leg.
The call leg entry is identified by using the same index
objects
that are used by Call Active table of IETF Dial Control MIB to
identify the call.
An entry of this table is created when its associated call
active entry in the IETF Dial Control MIB is created and the
call active entry contains information for the call
establishment to a network dialpeer.
The entry is deleted when its associated call active entry in
the IETF Dial Control MIB is deleted.
cvCommonDcCallHistoryEntry.1.3.6.1.4.1.9.10.55.1.2.1.1
The common information regarding a single network call leg.
The call leg entry is identified by using the same index
objects that are used by Call Active table of IETF Dial
Control MIB to identify the call.
An entry of this table is created when its associated call
history entry in the IETF Dial Control MIB is created and the
call history entry contains information for the call
establishment to a network dialpeer.
The entry is deleted when its associated call history entry in
the IETF Dial Control MIB is deleted.
Tabular Object
cvCommonDcCallActiveConnectionId.1.3.6.1.4.1.9.10.55.1.1.1.1.1
The global call identifier for the network call.
cvCommonDcCallActiveVADEnable.1.3.6.1.4.1.9.10.55.1.1.1.1.2
The object indicates whether or not the VAD (Voice Activity
Detection) is enabled for the voice call.
cvCommonDcCallActiveCoderTypeRate.1.3.6.1.4.1.9.10.55.1.1.1.1.3
The negotiated coder rate. It specifies the transmit rate of
voice/fax compression to its associated call leg for the call.
This rate is different from the configuration rate because of
rate negotiation during the call.
cvCommonDcCallActiveCodecBytes.1.3.6.1.4.1.9.10.55.1.1.1.1.4
Specifies the payload size of the voice packet.
cvCommonDcCallActiveInBandSignaling.1.3.6.1.4.1.9.10.55.1.1.1.1.5
Specifies the type of in-band signaling being used on the call.
cvCommonDcCallHistoryConnectionId.1.3.6.1.4.1.9.10.55.1.2.1.1.1
The global call identifier for the gateway call.
cvCommonDcCallHistoryVADEnable.1.3.6.1.4.1.9.10.55.1.2.1.1.2
The object indicates whether or not the VAD (Voice Activity
Detection) was enabled for the voice call.
cvCommonDcCallHistoryCoderTypeRate.1.3.6.1.4.1.9.10.55.1.2.1.1.3
The negotiated coder rate. It specifies the transmit rate of
voice/fax compression to its associated call leg for the call.
This rate is different from the configuration rate because of
rate negotiation during the call.
cvCommonDcCallHistoryCodecBytes.1.3.6.1.4.1.9.10.55.1.2.1.1.4
Specifies the payload size of the voice packet.
cvCommonDcCallHistoryInBandSignaling.1.3.6.1.4.1.9.10.55.1.2.1.1.5
Specifies the type of in-band signaling used on the call.
Table
cvCommonDcCallActiveTable.1.3.6.1.4.1.9.10.55.1.1.1
This table is a common extension to the call active table of
IETF Dial Control MIB. It contains common call leg information
about a network call leg.
cvCommonDcCallHistoryTable.1.3.6.1.4.1.9.10.55.1.2.1
This table is the Common extension to the call history table of
IETF Dial Control MIB. It contains Common call leg information
about a network call leg.
Object Identifier
ciscoVoiceCommonDialControlMIB.1.3.6.1.4.1.9.10.55
This MIB module contains voice related objects that
are common across more than one network
encapsulation i.e VoIP, VoATM and VoFR.
cvCommonDcMIBObjects.1.3.6.1.4.1.9.10.55.1
cvCommonDcCallActive.1.3.6.1.4.1.9.10.55.1.1
cvCommonDcCallHistory.1.3.6.1.4.1.9.10.55.1.2
cvCommonDcMIBNotificationPrefix.1.3.6.1.4.1.9.10.55.2
cvCommonDcMIBNotifications.1.3.6.1.4.1.9.10.55.2.0
cvCommonDcMIBConformance.1.3.6.1.4.1.9.10.55.3
cvCommonDcMIBCompliances.1.3.6.1.4.1.9.10.55.3.1
cvCommonDcMIBGroups.1.3.6.1.4.1.9.10.55.3.2
Group
cvCommonDcCallGroup.1.3.6.1.4.1.9.10.55.3.2.1
A collection of objects providing the common network
call leg information.
Copyright (c) Tandem Systems, Ltd., 2002-2011