| Scalar Object |
| envPresent | .1.3.6.1.4.1.9.2.1.77 |
Is there an environmental monitor card in
this box?, 0 - No, 1-AGS card present, wrong
firmware, 2-AGS CARD present, firmware ok,
3-7000 support |
| envTestPt1Descr | .1.3.6.1.4.1.9.2.1.78 |
Description of the test point 1. Typically
ambient air or the temperature of air
entering the router |
| envTestPt1Measure | .1.3.6.1.4.1.9.2.1.79 |
Current value of test point 1. Typically a
temperature in centigrade. |
| envTestPt2Descr | .1.3.6.1.4.1.9.2.1.80 |
Description of the test point 2. Typically
airflow or the temperature of air leaving the
router |
| envTestPt2Measure | .1.3.6.1.4.1.9.2.1.81 |
Current value of test point 2. Typically a
temperature in centigrade. |
| envTestPt3Descr | .1.3.6.1.4.1.9.2.1.82 |
Description of the test point 3. Typically
+5 volt |
| envTestPt3Measure | .1.3.6.1.4.1.9.2.1.83 |
Current value of test point 3. Typically the
value in millivolts of the +5v supply |
| envTestPt4Descr | .1.3.6.1.4.1.9.2.1.84 |
Description of the test point 4. Typically
+12 volt |
| envTestPt4Measure | .1.3.6.1.4.1.9.2.1.85 |
Current value of test point 4. Typically the
value in millivolts of the +12v supply |
| envTestPt5Descr | .1.3.6.1.4.1.9.2.1.86 |
Description of the test point 5. Typically
-12 volt |
| envTestPt5Measure | .1.3.6.1.4.1.9.2.1.87 |
Current value of test point 5. Typically the
value in millivolts of the -12v supply |
| envTestPt6Descr | .1.3.6.1.4.1.9.2.1.88 |
Description of the test point 6. Typically
-5 volt |
| envTestPt6Measure | .1.3.6.1.4.1.9.2.1.89 |
Current value of test point 6. Typically the
value in millivolts of the -5v supply |
| envTestPt1MarginVal | .1.3.6.1.4.1.9.2.1.90 |
Value at which the router will shutdown.
Typically the ambient air temperature that
will shut the router down. (e.g. 43) |
| envTestPt2MarginVal | .1.3.6.1.4.1.9.2.1.91 |
Value at which the router will shutdown.
Typically the airflow air temperature that
will shut the router down. (e.g. 58) |
| envTestPt3MarginPercent | .1.3.6.1.4.1.9.2.1.92 |
+/- Percentage that will shut the router
down, (e.g. 10%) typically +5 volt |
| envTestPt4MarginPercent | .1.3.6.1.4.1.9.2.1.93 |
+/- Percentage that will shut the router
down, (e.g. 15%) typically +12 volt |
| envTestPt5MarginPercent | .1.3.6.1.4.1.9.2.1.94 |
+/- Percentage that will shut the router
down, (e.g. 15%) typically -12 volt |
| envTestPt6MarginPercent | .1.3.6.1.4.1.9.2.1.95 |
+/- Percentage that will shut the router
down, (e.g. 10%) typically -5 volt |
| envTestPt1last | .1.3.6.1.4.1.9.2.1.96 |
Value of TestPt1 when last shutdown
occurred. |
| envTestPt2last | .1.3.6.1.4.1.9.2.1.97 |
Value of TestPt2 when last shutdown
occurred. |
| envTestPt3last | .1.3.6.1.4.1.9.2.1.98 |
Value of TestPt3 when last shutdown
occurred. |
| envTestPt4last | .1.3.6.1.4.1.9.2.1.99 |
Value of TestPt4 when last shutdown
occurred. |
| envTestPt5last | .1.3.6.1.4.1.9.2.1.100 |
Value of TestPt5 when last shutdown
occurred. |
| envTestPt6last | .1.3.6.1.4.1.9.2.1.101 |
Value of TestPt6 when last shutdown
occurred. |
| envTestPt1warn | .1.3.6.1.4.1.9.2.1.102 |
Is this test point at a warning level? |
| envTestPt2warn | .1.3.6.1.4.1.9.2.1.103 |
Is this test point at a warning level? |
| envTestPt3warn | .1.3.6.1.4.1.9.2.1.104 |
Is this test point at a warning level? |
| envTestPt4warn | .1.3.6.1.4.1.9.2.1.105 |
Is this test point at a warning level? |
| envTestPt5warn | .1.3.6.1.4.1.9.2.1.106 |
Is this test point at a warning level? |
| envTestPt6warn | .1.3.6.1.4.1.9.2.1.107 |
Is this test point at a warning level? |
| envFirmVersion | .1.3.6.1.4.1.9.2.1.108 |
Description of Environmental Card firmware |
| envTechnicianID | .1.3.6.1.4.1.9.2.1.109 |
Technician ID |
| envType | .1.3.6.1.4.1.9.2.1.110 |
The type of environmental card |
| envBurnDate | .1.3.6.1.4.1.9.2.1.111 |
The calibration / burn in date |
| envSerialNumber | .1.3.6.1.4.1.9.2.1.112 |
Serial Number of environmental monitor card |
| Object Identifier |
| lenv | .1.3.6.1.4.1.9.2.1 |