| Scalar Object |
| tsLines | .1.3.6.1.4.1.9.2.9.1 |
Number of terminal lines on this device.
Includes virtual lines. |
| ltsLineEntry | .1.3.6.1.4.1.9.2.9.2.1 |
A collection of per TTY objects in the
cisco Terminal Server implementation. |
| ltsLineSessionEntry | .1.3.6.1.4.1.9.2.9.3.1 |
A collection of per session and per TTY
objects in the cisco Terminal Server
implementation. |
| tsMsgTtyLine | .1.3.6.1.4.1.9.2.9.4 |
tty line to send the message to. -1 will
send it to all tty lines |
| tsMsgIntervaltim | .1.3.6.1.4.1.9.2.9.5 |
Interval between reissuing message in
milliseconds. Minimum non-zero setting is
10000. 0 will cause the routine to choose its
own intervals becoming more frequent as
MessageDuration gets close to expiring. 2hr,
1hr, 30min, 5min, 1min |
| tsMsgDuration | .1.3.6.1.4.1.9.2.9.6 |
Length of time to reissue message in
milliseconds. Minimum non-zero setting is
10000. A setting of 0 will not repeat the
message. |
| tsMsgText | .1.3.6.1.4.1.9.2.9.7 |
Up to 256 characters that will make up the
message |
| tsMsgTmpBanner | .1.3.6.1.4.1.9.2.9.8 |
Should the message be used as a temporary
banner. 1 - No. 2 - In addition to the normal
banner |
| tsMsgSend | .1.3.6.1.4.1.9.2.9.9 |
Sends the message. The value determines what
to do after the message has completed. |
| tsClrTtyLine | .1.3.6.1.4.1.9.2.9.10 |
tty line to clear. Read returns the last line
cleared. A value of -1 indicates no lines have
been cleared. |
| Tabular Object |
| tsLineNumber | .1.3.6.1.4.1.9.2.9.2.1.20 |
The line i've been talking about. |
| tsLineActive | .1.3.6.1.4.1.9.2.9.2.1.1 |
Boolean whether this line is active or not. |
| tsLineType | .1.3.6.1.4.1.9.2.9.2.1.2 |
Type of line. |
| tsLineAutobaud | .1.3.6.1.4.1.9.2.9.2.1.3 |
Boolean whether line will autobaud or not. |
| tsLineSpeedin | .1.3.6.1.4.1.9.2.9.2.1.4 |
What input speed the line is running at. |
| tsLineSpeedout | .1.3.6.1.4.1.9.2.9.2.1.5 |
What output speed the line is running at. |
| tsLineFlow | .1.3.6.1.4.1.9.2.9.2.1.6 |
What kind of flow control the line is
using. |
| tsLineModem | .1.3.6.1.4.1.9.2.9.2.1.7 |
What kind of modem control the line is
using. |
| tsLineLoc | .1.3.6.1.4.1.9.2.9.2.1.8 |
Describes the line's physical location. |
| tsLineTerm | .1.3.6.1.4.1.9.2.9.2.1.9 |
Describes the line's terminal type. |
| tsLineScrlen | .1.3.6.1.4.1.9.2.9.2.1.10 |
Length in lines of the screen of terminal
attached to this line. |
| tsLineScrwid | .1.3.6.1.4.1.9.2.9.2.1.11 |
Width in characters of the screen of
terminal attached to this line. |
| tsLineEsc | .1.3.6.1.4.1.9.2.9.2.1.12 |
Escape character used to break out of active
sessions. |
| tsLineTmo | .1.3.6.1.4.1.9.2.9.2.1.13 |
Line idleness timeout in seconds. |
| tsLineSestmo | .1.3.6.1.4.1.9.2.9.2.1.14 |
Session idleness timeout in seconds. |
| tsLineRotary | .1.3.6.1.4.1.9.2.9.2.1.15 |
Rotary group number the line belongs in. |
| tsLineUses | .1.3.6.1.4.1.9.2.9.2.1.16 |
Number of times a connection has been made
to or from this line. |
| tsLineNses | .1.3.6.1.4.1.9.2.9.2.1.17 |
Current number of sessions in use on this
line. |
| tsLineUser | .1.3.6.1.4.1.9.2.9.2.1.18 |
TACACS user name, if TACACS enabled, of user
on this line. |
| tsLineNoise | .1.3.6.1.4.1.9.2.9.2.1.19 |
Count of garbage characters received when
line inactive. |
| tsLineTimeActive | .1.3.6.1.4.1.9.2.9.2.1.21 |
The time in seconds since line was activated. |
| tslineSesLine | .1.3.6.1.4.1.9.2.9.3.1.7 |
Table index 1. |
| tslineSesSession | .1.3.6.1.4.1.9.2.9.3.1.8 |
Table index 2. |
| tslineSesType | .1.3.6.1.4.1.9.2.9.3.1.1 |
Type of session. |
| tslineSesDir | .1.3.6.1.4.1.9.2.9.3.1.2 |
Direction of session. |
| tslineSesAddr | .1.3.6.1.4.1.9.2.9.3.1.3 |
Remote host address of session. [What about
PAD connections?] |
| tslineSesName | .1.3.6.1.4.1.9.2.9.3.1.4 |
Remote host name of session. |
| tslineSesCur | .1.3.6.1.4.1.9.2.9.3.1.5 |
Boolean whether session is the currently
active one. |
| tslineSesIdle | .1.3.6.1.4.1.9.2.9.3.1.6 |
Time in seconds session has been idle. |
| Table |
| ltsLineTable | .1.3.6.1.4.1.9.2.9.2 |
A list of terminal server line entries. |
| ltsLineSessionTable | .1.3.6.1.4.1.9.2.9.3 |
A list of terminal server line and session
entries. |
| Object Identifier |
| lts | .1.3.6.1.4.1.9.2.9 |